Nedap AEOS Blue - Issue an Identifier; Check the Aeos Event Log

Installation and Configuration | AEOS Blue and vehicle identification EN
Manual version 3 24/48
Issue an identifier
To issue the ldentifier, do as follows:
1. Go to the
Visitor/Employee/Contractor > Announce screens.
2. In the
Identifier Type field, select the correct identifier type (in this example: Wiegand 26)
and enter the identifier number.
3. Click
OK to save the carrier data.
Issue an identifier in AEOS
Check the AEOS event log
1. Go to Monitor >Events >View log.
2. Click
Search.
3. Check if AEOS correctly processes the card.
For more information on the AEOS event log, see the AEOS user manual.
Step
03
Step
02