Nedap VP1007-B - Page 29

VP1007-B / Installation manual
Version 01.000 / November 2020 / EN
27
Livestock Management
First
level
Second
level
Third
level
Settings Description
   Set address
Menu option SA is only available to set an
address. After entering an address it is not
available again until factory default settings
are restored using option dF.
   High frequency

to
  Antenna 1 to 2
   Tune antenna: Start auto tuning
   Adjust antenna:
Manual tuning, switches autotuning circuit off
   Antenna power:
Default maximum setting 99; possibility to set a lower
value
   Adjust squelch
   Set FDX squelch
   Display FDX RSSI
   Set HDX squelch
   Display HDX RSSI
   Identification test
   Antenna options
   Notch filter (VP1007-B only)
   Notch filter off
   Notch filter on
   Notch filter temporarily on (for 24 hours))
   Tag mode Select option
   FDX only mode (continuously). Only FDX tags are
identified.
   HDX only mode (iso). Only HDX tags are identified.
   HDX only mode (iso) temporarily on (for 24 hours)
   FDX/HDX mode (iso). Both HDX and FDX tags are
identified.
   FDX/HDX mode (iso) temporarily on (for 24 hours)
   Responder number filter
   Set responder number filter off
   Set responder number filter on
   Default Ao settings
   Set Ao settings not to default