Before using for the first time en
13
--------
KBefore using for the first
time
Be f o r e usi ng for the fi rst ti me
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water.
Caution!
■ Damage to the appliance caused by the water
hardness being set incorrectly. The appliance cannot
remind you to descale it at the right time. Ensure that
the water hardness is set correctly.
■ Using unsuitable liquids may damage the appliance.
Do not use distilled water, highly chlorinated tap
water (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Notes
■ If your water is very hard, we recommend that you
use softened water.
■ If you only use softened water, you can set the water
hardness range to "softened".
■ If you use mineral water, set the water hardness
range to "very hard".
■ If you use mineral water, you must only use non-
carbonated mineral water.
Initial use
As soon as the appliance is connected to the power
supply, ‚ƒ:‹‹ flashes in the display.
Setting the time
Use the ( or ) buttons to set the current time.
After a few seconds, the time that has been set is
adopted.
Changing the time
1. Press the v button repeatedly until the v symbol
lights up.
2. Use the ( or ) button to change the time.
After a few seconds, the time that has been set is
adopted.
Setting the water hardness
Set the water hardness in the basic settings. ~ "Basic
settings" on page 18
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
1. Remove the accessories from the cooking
compartment.
2. Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3. Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
4. Fill the water tank. ~ "Filling the water tank"
on page 15
5. Set the specified type of heating and temperature for
steam-assisted heating. ~ "Operating the
appliance" on page 14 ~ "Steam" on page 15
6. After heating up the appliance with steam
assistance, heat it without steam assistance.
7. Set the specified type of heating and temperature for
heating without steam assistance.
Accessories
Baking and roasting shelf
Baking tray
Universal pan
Baking tray, non-stick
Universal pan, non-stick
Extra-deep pan
Steaming set for ovens
Profi pan
Lid for the Profi pan
Pizza tray
Grill tray
Ceramic brick
Glass roasting dish, 5.1 litres
Glass pan
ComfortFlex rail (1 level)*
3 x fully extendable pull-out rack*
*Accessory does not fit in every appliance, quote the E no. when order-
ing
Setting Water hardness range
mmol/l German
(°dH)
French (°fH)
™‚‚ ‹ = softened - - -
™‚‚ ‚ = soft Up to 1.3 Up to 7.3 Up to 13
™‚‚ ƒ = medium 1.3–2.5 7.3–14 13–25
™‚‚ „ = hard 2.5–3.8 14–21.3 25–38
™‚‚ … = very hard Above 3.8 Above 21.3 Above 38
Steam-assisted heating
Type of heating CircoTherm ‚ steam-assisted programme
¥
Temperature 200 °C
Cooking time 30 minutes
Heating without steam assistance
Type of heating Top/bottom heating ƒ
To Next Page
Loading...
