en Cleaning function
26
Tips
■ Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■ Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■ Use the universal pan for baking very moist cakes.
■ Use suitable ovenware for roasting, e.g. a roasting
dish.
.Cleaning function
Cl eani ng function
Your appliance is equipped with a self-cleaning
function, EasyClean and a descaling function You can
use the self-cleaning function to clean the cooking
compartment. Use the EasyClean cleaning aid for
intermediate cleaning of the cooking compartment. Dirt
is softened beforehand using EasyClean. It can then be
removed more easily. You can use the descaling
function to remove limescale from the evaporator.
Self-cleaning
Use "Self-cleaning" mode to clean the cooking
compartment.
You can choose from three cleaning cycles.
The dirtier the cooking compartment and the longer the
dirt has been there, the more powerful the cleaning
cycle should be. It is sufficient to clean the cooking
compartment every two to three months. You can clean
it more frequently if necessary. Cleaning requires
approx. 2.5-4.8 kilowatt hours.
Notes
■ For safety reasons, the appliance door locks
automatically once a certain temperature is reached.
You will not be able to open it again until the lock
symbol n on the display has gone out.
■ The interior lighting will not come on while the
appliance is being cleaned.
:Warning
Risk of burns!
■ The cooking compartment becomes extremely hot
during the cleaning function. Never open the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
Risk of burns!
■ ; The appliance becomes very hot on the outside
during the cleaning function. Never touch the
appliance door. Allow the appliance to cool down.
Keep children at a safe distance.
:Warning
Risk of harm to health!
The cleaning function heats up the cooking
compartment to a very high temperature so that food
remnants left over from roasting, grilling and baking will
burn off.This process releases vapours, which can
irritate the mucous membranes. While the cleaning
function is running, keep the kitchen well ventilated. Do
not remain in the room for long periods. Keep children
and pets away. Follow the instructions even when using
the Delayed start function with a delayed end time.
Before running the cleaning function
The cooking compartment must be empty. Remove any
accessories, cookware or shelf rails from the cooking
compartment. Please see the relevant section for
information on how to remove the rails. ~ "Rails"
on page 29
Clean the appliance door and along the edges of the
cooking compartment in the area around the seal. Do
not scrub or remove the seal.
Clean the inner door panel using hot soapy water and a
dish cloth. Dry with a soft cloth. If the cooking
compartment is heavily soiled, use oven cleaner.
:Warning
Risk of fire!
■ Loose food remnants, fat and meat juices may catch
fire when the cleaning function is in progress. Before
you start the cleaning function, always remove the
worst of the food residues and remnants from the
cooking compartment.Do not use the cleaning
function for cleaning accessories.
Risk of fire!
■ The appliance will become very hot on the outside
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
Risk of fire!
■ If the door seal is damaged, a large amount of heat
will be generated around the door. Do not scrub or
remove the seal. Never operate the appliance if the
seal is damaged or missing.
Setting the self-cleaning
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
The duration of each cleaning setting is preset and
cannot be changed.
1. Use the function selector to set the cleaning
functions 2.
The 2 symbol and the cleaning functions appear in
the display. The first cleaning function is selected.
2. Press the ) or ( button repeatedly until the ˜ symbol
is selected.
"PYRO" appears in the display.
3. Use the temperature selector to set the cleaning
setting.
Note: Once cleaning starts, the cleaning level can
no longer be changed.
The duration appears in the display for each setting.
The cleaning function starts after a few seconds. The
cooking time counts down on the display.
Cycle Cleaning perfor-
mance
Length of cycle
1 Gentle Approx. 1 hour and 15 minutes
2 Medium Approx. 1 hour and 30 minutes
3 Intensive Approx. 2 hours
To Next Page
Loading...
