NCD+ 3200 Manual | Normal Operation
Part No. 729-110-037 Rev. 1.31 | May 2016 © 2014 Nelson Stud Welding, Inc. All Rights Reserved.
3.4 Weld Quality Visual Inspection
Issue: Too cold
Weld Flash: Not Visible
Weld: Very weak, Will break
Adjustments: Increase voltage,
reduce spring pressure, or
increase capacitance
Issue: Acceptable Weld
Weld Flash: Normal, No
significant weld splatter
Weld: Good, strong
Adjustments: None required
Issue: Too Hot
Weld Flash: Excessive flash
and weld splatter
Weld: Weak, May break
Adjustments: Reduce voltage,
increase spring pressure, or
reduce capacitance
To Next Page
Loading...
Need help?
General
