OPERATING INSTRUCTIONS
1. Plug in the device.
The device conrms this by a signal tone.
Now the display shows the environmental moisture level.
2. The level of humidication can be set from 10% (min.) up to 90% (max.).
During this process dehumidication mode-key flashes.
3. When you have reached the desired level wait for 5 seconds for the dehumidier to
save the value.
The dehumidication mode-key stops flashing and the dehumidier starts working.
The display for environmental moisture level shows the dierence.
4. Before operating, place machine on a horizontal, stable surface.
5. The appliance shall be installed in accordance with national wiring regulations.
6. The appliance is connected by the cord of H05VV-F 3G 0.75mm
2
with plug.
AUTOMATIC DEFROSTING FUNCTION
At low temperatures the device will start defrosting automatically.
During this phase the cooling fan works properly but the inserted compressor switches itself
o.
The “Automatic Defrosting”-symbol and the “FAN”-key flash.
COLLECTION CONTAINER FOR WATER
If the collection container is completely lled, the symbol “Filling Level Indicator” will show
this.
In addition, there will be an acoustic signal (for 5 seconds) and the device will stop
dehumidifying.
PERIOD OF PROCESSING
The Operating Hours Counter shows for how many hours the device has been in use.
EN
To Next Page
Loading...
