Nemtek Taut Wire Node User Manual

18
Installer Notes
• There are no user serviceable parts on the Node board.
• The board should be installed inside a suitable enclosure, away from excessive
heat and damp.
• Never exceed the maximum ratings given in section 4, as this may lead to
permanent damage to the board.
• Do not install the Taut Wire sensor communication wires near electric fence or
other high voltage or current carrying conductors.
Rev D, 20 March 2019
Print Code:

Nemtek Taut Wire Node Specifications

General

Brand	Nemtek
Model	Taut Wire Node
Category	Control Unit
Language	English