Neon MCB1533 - System Connections; Connection Order and Safety

GB-12
Connections
Caution: Make all connections before plugging the unit into the AC Power outlet.
Please read these additional installation notes before use.
If the following steps are not followed correctly the unit may become damaged.
Please note the correct steps for setting up the unit are as follows:
1. ThespeakerwiresbetweenCDplayerandspeakeraretobeconnectedrst.
2. After the above cables are correctly connected, the AC power cord can then be connected
to power outlet.
Caution:
i) Reversing the steps by connecting the AC power cord rst will cause malfunction of
the unit.
ii) During operation, if the control cable requires to be reconnected, the AC power
supply must be disconnected rst. Otherwise, damage to the unit may be caused.