Neon MCB1533 - CD Program and Repeat Play; Programme Playback Setup

GB-18
Text Display During Playback
Repeatedly press the DISPLAY button on the remote control to show the current track number
and single remain time, the current track number and single elapsed time or total track number
and total remain time .
Programme Play
You can programme up to 20 tracks to play in any desired order. The player must be in stop
mode only with a CD inserted.
1. Insert a disc and press the
L
button when it starts playing.
2. Press the PROG button on the remote control, the VFD will display "
01 p--01
" and
"PROG" begins to blink.
3. Press the 0-9, +10 buttons on the remote control to select the desired track number.
4. Press the PROGbuttonontheremotecontroltoconrmthetracknumbertobestored.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press the
BF
button to start programme play.
7. Press the
L
button once to stop the programme play. Press the
L
button twice to clear
programme.
Playing the Beginning (Intro) of each Track
Press the INTRO button on the remote control to play the beginning of each track
consecutively. The playing time of each track is 10 seconds.
When you hear the desired track, press the
BF
button twice.
Playing Repeatedly (CD disc)

ONE and ALL Repeat Play can be set by pressing the MODE button.
- First press : To repeat the same track, the words “TRK” and “ REP” will blink.
- Second press : To repeat playing all tracks on a disc, the words “TRK” will stay lit and
“REP ALL” will blink.
- Third press : To play tracks randomly, the words “TRK” will stay lit and “SHUF” will
blink.
- Fourth press : To cancel the repeat playing, the word “SHUF” will disappear.

Repeat A-B can be set by pressing the A-B button.
- First press : Select the start point, the words “A-” will stay lit.
- Second press : Select the end point, the words “A-B” will stay lit.
- Third press : To cancel repeat play, the word “A-B” will disappear.
Note: The section A and B can be set only within the same track.