Neon MCB1533 - Troubleshooting Guide; Power and Sound Issues; Unit and Remote Control Problems; Media Playback Issues

GB-24
No power
- Ensure that the AC adaptor plug of the
unit is connected properly.
- Ensure that there is power at the AC
outlet.
- To save power, the unit switches to
standby automatically 15 minutes after a
play reaches the end and no control is
operated.
No sound
- Adjust the volume.
No response from the unit
- Disconnect and reconnect the AC
adaptor plug, then turn on the unit again.
Remote control does not work
- Beforepressinganyfunctionbutton,rst
select the correct source with the remote
control instead of the main unit.
- Reduce the distance between the remote
control and the unit.
- Insert the battery with its polarities (+/–
signs) aligned as indicated.
- Replace the batteries.
- Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
- Insert a disc.
- Check if the disc is inserted with the print
side facing inward.
- Wait until the moisture condensation at
the lens has cleared.
- Replace or clean the disc.
- Useanalized CDorcorrectformat
disc.
Cannot display some files in USB device
- ThenumberoffoldersorlesintheUSB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
- Theformatsoftheselesarenot
supported.
USB device not supported
- The USB device is incompatible with the
unit. Try another one.
Poor radio reception
- Increase the distance between the unit
and your TV or VCR.
- Fully extend and adjust the FM antenna.
Timer does not work
- Set the clock correctly.
- Switch on the timer.
Clock/timer setting erased
- Power has been interrupted or the power
cord has been disconnected.
- Reset the clock/timer.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling
for service.
If you cannot solve the problem from the hints given here, or the unit has been physically dam-
aged,callaqualiedperson,suchasyourdealer,forservice.