Neon MTB830 - Switching the Unit ON;OFF; Resetting the Unit; Setting the Clock

- 10 -
Remote Control Operation Range
Point the remote control to the unit no more than 6
meters from the remote control sensor and within
60° horizontally and 40° vertically of the front of the
unit. The operating distance may vary according to the
brightness of the room.
Note:
• Makesurethatthereisnoobstaclebetweenthe
infrared remote sensor of the unit and remote
control. If you install the unit on rack, etc.., the
remote controllable range may decrease depending
on the thickness or colour of glass door of rack.
• Donotexposetheinfraredremotesensorto
direct sunlight or other strong light, such as inverter
uorescent light.
Connecting the AC Power Cord
Insert the AC adapter’s DC plug into the unit and
other side into a wall outlet, and your system is at your
command!
Caution:
* Be sure to unplug the power plug from the outlet
when going out or when the unit is not in use for
an extended period of time.
6m directly
in front of the unit
DC IN