- 17 -
- To pause/resume play, press
BF
.
- To skip to a track, press
/ .
- To increase or decrease the volume, press
VOL +/-.
5. Long pressing the
PAIRING
button on the remote control for more than 2 seconds to disable
the Bluetooth function from your Bluetooth device.
Note:
* The operational range is approximately 10 meters.
* Any obstacle can reduce the operational range.
* The device will also be disconnected when the device is moved beyond the operation range.
* If you want to reconnect the device to the unit, place it within the operational range.
* This unit supports A2DP (Advanced Audio Distribution Profile).
* Compatibility with all Bluetooth devices is not guaranteed.
Setting the Sleep Timer
When the unit is turned on, repeatedly press the
SLEEP
button on the remote control to select
a set period of time (in minutes):
120, 90, 75, 60, 45, 30, 15
When sleep timer is activated, the “
Z
z
” is displayed.
To deactivate sleep timer
Press the
SLEEP
button repeatedly until [SLEEP 00] is displayed.
When sleep timer is deactivated, the “Z
z
” is disappears.
Set the alarm timer
Caution: Make sure that you have set the clock correctly.
1. Long pressing the
TIMER
button on the remote control for more than 2 seconds, the “ ”
and
the source (e.g. DISC)
will blink on the display lens
.
2. Press the / buttons on the remote control to select a source (e.g. DISC, TUNER etc.).
3. Press the
TIMER
button to store the setting, the hour digits blink.
4. Repeat steps 2-3 to set the hour, minute and adjust volume.
Note:
* If DISC/USB source is selected and the audio cannot be played, TUNER is activated
automatically.
* If no button is pressed in 30 seconds, the unit exits timer setting mode automatically.
To Next Page
Loading...