Neon MTB830 - FM Radio Operation; Tuning to FM Stations; Storing FM Radio Stations; Selecting FM Reception Mode

- 12 -
Sound Quality
Adjusting the Volume
To increase or decrease the volume, press the
VOL +/-
buttons.
Mute sound
You can mute the sound temporarily.
During play, press the
MUTE
button to mute or unmute sound.
Note: If you change the volume or source when the sound is muted, muting is cancelled.
Adjusting the Super Bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the
S-BASS
button on the remote control to get the effect, the “DBB ON” will display on
the display lens . Press again to cancel the effect, the “DBB OFF” will display on the display lens .
Controlling the Loudness
This unit has a loudness function, which can automatically increase the bass sound effect at low
volume. It can also increase the bass sound effect at high volume, but it will be relatively less when
it is at high volume.
Press the
LOUDNESS
button to obtain the loudness function, the “LOUD ON” will display on
the display lens
. Press again to cancel the effect, the “LOUD OFF” will display on the display lens .
Presetting Equalizer
You can adjust the sound according to the genre of the music your taste.
During play, repeatedly press the
P-EQ
button to select your preferred sound mode.
- POP
- ROCK
- CLASSIC
- JAZZ
- FLAT
Changing the Front Panel Darkness
To dim or brighten the display, repeatedly press the DIM button on the remote control to the
desired brightness.
Listen through headphone
Plug a headphone into the socket on the rear of the unit.