Neon MTB830 - Track Intro and Random Playback; Album Selection and Repeat Modes

- 14 -
Disc (audio CDs and MP3/WMA discs) Operation
Caution: This unit can only use 12cm discs!
Disc Playing
1. Repeatedly press the
SOURCE
button to select DISC source. The word “DISC” will display on
the display lens.
2. Insert the disc into the disc tray (with the printed side up) from the disc tray window then
gently push it up.
3. The unit will read the disc and play it automatically.
Note: If in stop mode, please press the
BF
button to start playing the disc.
4. Press the
BF
button to temporarily stop the playing, press the button again, it will continue
to play.
5. Press the
L
button to stop the disc playing.
6. Press the
K
button on the unit or eject the disc button on the remote control to eject the
disc.
To Skip Search and Play

Press the
button on the remote control once or more to skip previous one or more tracks
on the disc.

Press the
button on the remote control once or more to skip forward one or more tracks
on the disc.
To Search and Play
Long pressing the / buttons on the remote control to search for the position that you intend
to start playing.
Text Display During Playback

For audio CD
Repeatedly press the
INFO
button on the remote control to show the current track number
and single elapsed time or single remain time or total elapsed time or total remain time.

For MP3/WMA Disc
Repeatedly press the
INFO
button on the remote control, ID3 information (song title and art-
ist) scrolls on the display lens for a few minute or “NO ID3” if there is no ID3 information.
Programme Play (For audio CDs and MP3/WMA discs)
You can programme up to 20 tracks to play in any desired order.
1. Insert a disc and press the
L
button when it starts playing.
2. Press the
PROG
button on the remote control, "001 P--01" will display on the display lens .
3. Press the / buttons on the remote control to select the desired track number.
- To select track number 8, “008 P--01”
will display on the display lens.