Configuring your Mailing System
125
8
Settings Overview
This section describes two types of settings that are available on your system:
• User settings, that only last as long as the user who applies them is logged in
• Supervisor settings, sets the default or permanent settings of your Mailing System.
User Settings
The user settings described in the sections below are:
• Setting the display language
• Adjusting the screen contrast
• Enabling/disabling key beeps and warning/error beeps.
Supervisor Settings
Your Mailing System has one supervisor PIN code that allows you to configure the
default settings and perform other functions such as managing accounts and access
rights, generating certain reports, etc.
The supervisor settings allow you to:
• Change the default user settings
• Modify system time-outs / activate the Smart Start function (if available)
• Set funds warnings (high amount, low funds) and activate a funding PIN code
• Define a default weighing method for mailing, and calibrate the weighing devices
• Design a default imprint (rate, text, ad die), activate the Automatic Date Advance
function and set a default printing offset
• Activate sealing mode as default setting
• Enter connection parameters.
8.1 Settings Overview
Other user settings are described in the corresponding sections:
Processing Mail
p.23,
Maintaining your Mailing System
p.167,
etc.
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
To Next Page
Loading...
Need help?
General
