Copyright © Neoway Technology Co., Ltd. All rights reserved.
8 Safety Recommendations
Ensure that this product is used in compliant with the requirements of the country and the environment.
Please read the following safety recommendations to avoid body hurts or damages of product or work
place:
Do not use this product at any places with a risk of fire or explosion such as gasoline stations, oil
refineries, etc
Do not use this product in environments such as hospital or airplane where it might interfere with
other electronic equipment.
Please follow the requirements below in application design:
Do not disassemble the module without permission from Neoway. Otherwise, we are entitled to
refuse to provide further warranty.
Please design your application correctly by referring to the HW design guide document and our
review feedback on your PCB design. Please connect the product to a stable power supply and
lay out traces following fire safety standards.
Please avoid touch the pins of the module directly in case of damages caused by ESD.
Do not remove the USIM card in idle mode if the module does not support hot plugging.
To Next Page
Loading...
Need help?
General
