Neoway M590E - User Manual

Neo_M590E V1 GPRS Module
AT Command Set
Version 1.0

Summary

Revision Record

Boot LOG Instruction

General Commands

Querying Manufacturer and Version

Query module manufacturer, model, version, and software version.

Querying Signal Quality

Check receiving signal strength (RSSI) and bit error rate (BER).

Network and GPRS Registration Status

Query network and GPRS registration status.

Querying IMEI

Query the International Mobile Equipment Identity (IMEI).

Module Control Commands

Commands for module restart, sleep mode, and multiplexing.

PIN Code Management

Enter PIN codes, lock/unlock SIM, modify PIN.

GPRS Attach and PDP Settings

Set GPRS attach status and PDP format.

GSM Network Selection and Dialup

Select GSM network and perform GPRS dialup.

SMS Commands

SMS Storage and Input Mode

Set SMS storage preference and input mode (Text/PDU).

Reading and Listing SMS

Read and list SMS messages from memory.

Sending and Writing SMS

Send and write SMS messages.

Deleting and Managing SMS

Delete SMS messages and set SMS center number.

TCP;UDP Data Service

PPP and TCP;UDP Connection Setup

Set up PPP, TCP, and UDP connections.

Sending and Receiving Data

Send and receive TCP/UDP data.

Transparent Transmission

Set up TCP/UDP transparent transmission.

Automatic TCP Data Sending

Configure automatic TCP data sending.

DNS Command

Querying IP Address

Query the IP address for a given URL.

FTP AT Commands

FTP Login and Logout

Log in and out of the FTP server.

FTP Data Transfer

Download and upload data from/to the FTP server.

FTP Connection Status

Query the FTP connection status.

TCP Server AT Commands

TCP Server Listening

Set up TCP listening for the server.

Client Connection Management

Close client connections, send/receive data.

Unlimited UDP Server AT Commands

UDP Server Listening

Set up UDP listening for the server.

UDP Client Data Transfer

Send and receive data from UDP clients.

LBS Command

Obtaining Module Location

Obtain the module's location information.

Other AT Commands

Querying Base Station Information

Query base station information.

Getting Local Port of Socket

Get the local port ID of a socket.

TCP Command Example Process

TCP Link via Internal Protocol

Example process for TCP link via internal protocol.

TCP Connection via External Protocol

Example process for TCP connection via external protocol.

Reference Process of AT Command Programming

PDU SMS Message Content

Details on the content format of PDU SMS messages.

Text SMS Flowchart (UART)

PDU SMS Flowchart (UART)

Neoway M590E Specifications

General

Brand	Neoway
Model	M590E
Category	Control Unit
Language	English