Neoway M590E - LBS Command; Obtaining Module Location

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
50
8 LBS Command
8.1 Obtaining the Location of the Module:
+CIPGSMLOC
Description
To obtain the location information of the module
Format

AT+CIPGSMLOC<CR>

AT+CIPGSMLOC=<n><CR>
Parameter
<n>: request selection
0: Close location request
1: multi-BS positioning request
Return Value
<CR><LF>+CIPGSMLOC: <fail_string><CR><LF>
<fail_string>: Failure string
<fail_string>:
CONTACT FAIL
LINK FAIL
LINK NOT FREE
<CR><LF>OK<CR><LF>
<CR><LF>+CIPGSMLOC: {<result_string>}
<CR><LF>+CIPGSMLOC: OK<CR><LF>
< result_string>: string including longitude and latitude
<CR><LF>OK<CR><LF>
<CR><LF>+CIPGSMLOC: <code>
<CR><LF>+CIPGSMLOC: FAIL <CR><LF>
<code>: return code after request is submitted successfully but not longitude or latitude
information is returned.
401: No right
400: error occurs during request parsing.
404: legal request, but the queried BS is not included.
408: parsing times out.
500: internal error of server
<CR><LF>OK<CR><LF>
<CR><LF>+CIPGSMLOC: TIMEOUT<CR><LF>