Neoway M590E - PDU SMS Flowchart (UART)

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
60
A.3 Flowchart of Sending PDU SMS Messages (Through
UART)
Figure A-2 Flowchart of Sending PDU SMS messages
Set the PDU mode.
AT+CMGF=0
OK
Configure TE character set.
AT+CSCS="UCS2"
OK
Send an SMS message.
AT+CMGS=23<CR>
>
Content of the message to be
sent
0891683110808805F001000B813124819396F3
00080A00680065006C006C006F
Return value
+CMGS: 117
OK
End
Input message content,
which is encoded in PDU
mode and sent by pressing
Ctrl+Z (0X1A).
The length of the SMS
message is 23 bytes in
PDU mode.
Successfully