Neoway M590E - Sending and Writing SMS

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
23
901A624B673A84254E1A53850020007700610070002E00310030003000310030002E0
063006F006D
+CMGL: 2,"REC READ","10010","","14/06/23,14:42:27+32"
0500034F03016E2999A863D0793AFF0C622A6B62003667080032003265E5FF0C60A8
5F5367085957991051856D4191CF5DF24F7F752800340033002E00360031004D0042F
F0C52694F596D4191CF003200350036002E00330039004D0042FF08598260A88BA28
D2D4E867EA256F4811662164E9196C0621660A6005400566D4191CF53E052A05305
FF0C5219
OK.
AT+CMGL=?
+CMGL:("REC UNREAD", "REC
READ", "STO UNSENT", "STO SENT",
"ALL")
OK
Query in text format (AT+CMGF=1).
AT+CMGL=?
+CMGL: (0-4)
OK
Query in PDU format (AT+CMGF=0).
AT+CMGF=1
OK
AT+CMGL=4
ERROR
The parameter should be set to
0
.
AT+CMGF=0
OK
AT+CMGL="ALL"
ERROR
The parameter should be set to
1
.
Remarks
N/A
2.7 Sending SMS Messages: +CMGS
Description
To send an SMS message from the module to the network
The network will return reference value
<mr>
to the module after the SMS message is
sent successfully.
Format

AT+CMGS=<da>[,<toda>]<CR>text is entered<Ctrl-Z/ESC> (Text command
syntax)

AT+CMGS=<length><CR>PDU is given<Ctrl-Z/ESC> (PDU command syntax)
Parameter
<da>: The destination number to which the SMS message is sent in text mode
<text>: SMS message content in text mode
<length>: The byte length of the SMS message content in PDU mode
<mr>: The storage location
<CR>: End character