Neoway M590E - Setting SMS Inputting Mode: +CMGF; Setting the te Character Set: +CSCS

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
18
ERROR
Remarks
N/A
2.2 Setting SMS Inputting Mode: +CMGF
Description
To set the SMS inputting mode
Format

AT+CMGF=[<mode>]<CR>

AT+CMGF?<CR>

AT+CMGF=?<CR>
Parameter
<mode>:
0: PDU mode
1: Text mode
Return Value
<CR><LF>OK<CR><LF>
<CR><LF>+CMGF: <mode>
<CR><LF>OK<CR><LF>
<CR><LF>+CMGF: (list of supported <mode>s)
<CR><LF>OK<CR><LF>
AT+CMGF=1
OK
Set the SMS to text mode.
AT+CMGF?
+CMGF: 1
OK
Query the current mode of SMS message
input.
AT+CMGF=?
+CMGF: (0,1)
OK
Query the value range of SMS mode
setting.
Remarks
N/A
2.3 Setting the TE Character Set: +CSCS
Description
To set the format of the TE character set
Format

AT+CSCS=[<chest>]<CR>

AT+CSCS?<CR>

AT+CSCS=?<CR>
Parameter
< chset >:

"IRA": International reference alphabet (ITU-T T.50)

"GSM": Default GSM alphabet (GSM03.38.6.2.1)

"HEX": Character string consisting of hexadecimal numbers from
0x00
to
0xFF
. For
example, "032FE6", equal to three 8-bit characters, whose values are respectively
3
,
47
, and
230
in decimal system. These characters do not have to be converted with