Neoway M590E - Module Control Commands

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
6
1.7 Restart the Module: +CFUN
Description
To restart the module
Format

AT+CFUN=<fun>,<rst><CR>

AT+CFUN?<CR>

AT+CFUN=?<CR>
Parameter
<fun>
: Module work mode
0: sleep mode
1: work mode
<rst>
: Specifies whether to restart the module
0: Do not restart the module
1: Restart the module
Return Value
<CR><LF>OK<CR><LF>
or
<CR><LF>ERROR<CR><LF>
<CR><LF>+CFUN: <fun>
<CR><LF>OK<CR><LF>
<CR><LF>+CFUN: (list of supported <fun>s), (list of supported <rst>s)
<CR><LF>OK<CR><LF>
Example
AT+CFUN=1,1
OK
Restart the module
AT+CFUN?
+CFUN: 1
OK
Query the current functions.
AT+CFUN=?
+CFUN: (0,1),(0,1)
OK
Query the range of the parameter value.
Remarks
N/A
1.8 Multiplexing Mode: +CMUX
Description
To enable/disable the GSM 07.10 multiplexing protocol control channel
Format

AT+CMUX=<mode>[,<subset>[,<port_speed>[,<N1>[,<T1>[,<N2>[,<T2>[,<T3>[,<
k>]]]]]]]]<CR>

AT+CMUX=?<CR>
Parameter
<mode>
:
integer type (multiplexer Transparency Mechanism)
0: Basic option
1: Advanced option (not supported)
<
subset
>
: integer type.