Neoway M590E - Other AT Commands; Querying Base Station Information

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
52
9 Other AT Commands
9.1 Querying Base Station Information: +POSI
Description
To query the base station information
Format
AT+POSI=<mode><CR>
Parameter
Return Value
<CR><LF>+POSI: MODE,MCC,MNC,LAC,CI,BSIC,
RxLev,ENDED[…]<CR><LF><CR>
<LF>OK<CR><LF>
MODE: 1, indicating that all base station information will be read
MCC: Country code
MNC: Mobile network code, hexadecimal
LAC: Area code, hexadecimal
CI: Cell ID, hexadecimal
BSIC: Base station ID, hexadecimal
RxLev: Signal strength of the base station, expressed by 1 to 64
ENDED: End symbol. 0 indicates there is more base station information; 1 indicates that
this is the last line of the base station information.
Example
AT+POSI=1
+POSI:1,460,00,27A8,EA7,1D,7,1
OK
Obtain the
information of one
base station.
AT+POSI=1
+POSI:
1,460,01,2543,A85D,3E,45,0,460,01,2543,AB13,1E,41,0,460,0
1,2543,A85E,10,36,0,460,01,2543,AA51,0A,34,0,460,01,2543,
B046,11,32,0,460,01,2543,A9A8,3F,31,0,460,01,2543,A805,33,
27,1
OK
Obtain the
information of
multiple base stations.
Remarks
If no cell is found, the module returns OK.