Neoway M590E - Setting the Parameters of the Text Mode: +CSMP; Displaying the Parameters of the Text Mode: +CSDH

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
27
OK
Remarks
N/A
2.12 Setting the Parameters of the Text Mode: +CSMP
Description
To select required values for the additional parameters in the text mode, and set the
validity period since the message is received from the SMSC, or the absolute time
defining the end of the validity period
Format

AT+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]<CR>

AT+CSMP?<CR>
Parameter
<fo>: Determined by the command or the first 8 bits of the result code
GSM 03.40
SMS-DELIVER
; SMS-SUBMIT (default value: 17); or adopt the integer-type
SMS-COMMAND (default value: 2)
<vp>:
Value
Validity Period
0-143
(vp+1)*5mins, 12 hours at most
144-167
12hours +((vp–143)*30mins), 24 hours at most
168-196
(vp–166)*1day
197-255
(vp–192)*1week
<pid>: Integer-type TP-protocol-ID (default value: 0)
<dcs>: Encoding plan for integer-type cell broadcast data (default value: 0)
Return Value
See the Example.
Example
AT+CSMP=17,167,0,0
OK
Text mode parameters:
17: 00010001 in binary system, indicating no status report
167: The validity period of the information is 24 hours.
0: Default value
0: Only messages in text format can be sent (8 indicates
PDU messages).
AT+CSMP?
+CSMP: 17,167,0,0
OK
Query the current settings of the text mode.
Remarks
N/A
2.13 Displaying the Parameters of the Text Mode:
+CSDH
Description
To set whether the detailed header information is displayed in the result code in text mode