Neoway M590E - Page 56

Neo_M590E V1 GPRS Module AT Command Set
Copyright © Neoway Technology Co., Ltd
51
Example
AT+CIPGSMLOC
OK
+CIPGSMLOC:
{"location":{"lat":22.69083,"lng":113.985228},"accuracy":0.0}
+CIPGSMLOC: OK
The command is sent
successfully.
The module reports
location information.
AT+CIPGSMLOC
GPRS DISCONNECTION
+CIPGSMLOC: CONTACT FAIL
No SIM card is
installed.
AT+CIPGSMLOC
+CIPGSMLOC: CONTACT FAIL
The server domain
name fails to be
translated.
AT+CIPGSMLOC
+CIPGSMLOC: LINK FAIL
The connection to the
server fails to be set
up.
AT+CIPGSMLOC
OK
+CIPGSMLOC: 404
+CIPGSMLOC: FAIL
The location request is
sent successfully, but
the queried BS is not
included.
AT+CIPGSMLOC=1
OK
AT+CIPGSMLOC=1
+CIPGSMLOC: LINK NOT FREE
Request multi-BS
positioning
The connection is
occupied
AT+CIPGSMLOC=0
OK
Close the request.
The link will be
released.
AT+CIPGSMLOC=1
OK
+CIPGSMLOC:
{"location":{"lat":22.689646628671216,"lng":113.9858612179
0129},"accuracy":0.0}
+CIPGSMLOC: OK
Request multi-BS
positioning
The module reports its
location.
Remarks

Activate the PPP before using this command.

The obtained location information is the GPS coordinates.

If the server does not reply in 10 seconds after the request is submitted successfully,
the module returns
+CIPGSMLOC: TIMEOUT
.

The current coordinates of latitude and longitude are valid and precision is reserved
(0.0 by default).