Page 16
Appendix B - Mounting Hardware
4x 5/16" bolts. Adhere to national
and local codes and regulations.
2x site-supplied Neptune stainless
steel bands (PN: 13089-001) or other
¾-inch wide stainless-steel straps for
poles larger than 4" (102 mm)
4x site-supplied 5/16" bolts. Adhere
to national and local codes and
Use included pole mounting bracket
for 1" to 3" (25.4 to 76.2 mm) pole
Use included pole mounting clamp
for 3" to 8" (76.2 to 203.2 mm) pole
Use included mounting hardware for
up to 2 3/8" (60 mm) pole
Gateway
Use included hardware and site-
supplied M8 bolts. Adhere to all local
Gateway
Use included hardware and site-
supplied bolts. Adhere to all local
Gateway
Use included mounting kit 13797-000
for 2" to 3 1/2" (50.8 to 88.9 mm)
Use optional pipe clamp 13089-001
for 3" to 16" (76.2-406.4 mm) pole
Use included hardware to mount to 1
5/8” to 2 3/8” (40-60 mm) pole.
Use strut clamp when mounting to 1-
5/8" strut channel
Only if needed to
improve RF signal
Use included mounting hardware to
mount to 1"- 2 1/2" (25.4 to 63.5
improve RF signal
To Next Page
Loading...
Need help?
General
