Neptune Technology R900 Installation Supplement

Page 6
Required Installation Equipment
Note: Ethernet cable and DC cable for the PoE injector are site-supplied and should adhere to the specifications
provided in the required equipment table.
Item
Description
Use
Toolkit
Medium, flat-head, Phillips, etc.
screwdrivers
Cordless electric drill with assorted
bits
Crescent wrench
Standard socket wrench set
Hammer
Channel Locks
T27 Torx Pin-Head Tool
PPE as required
Various
Weatherizing kit
Scotch WK-101
Weatherizing cable connections
Corrosion inhibitor
NOCO Company's NCP-2 or
Sanchem Inc.'s No-OxID Grease "A"
Apply to battery terminals
CAN wrench 3/8”
The Jonard double end can socket
wrench 3/8” by 7/16” hex found
here is recommended.
The can wrench is required to
open the UPS box.
UV stable cable ties
8” to 12 “ (20 cm to 30 cm)
Securing short coax cable
Cable hangers
Various Sizes
Securing coaxial cable
Copper Wire
Copper wire with a minimum
temperature rating of 75°C
AWG #4 or #6
Coax ground kits
Ground wire attachment to tower
Grounding
Coax hoisting grips
As recommended by coaxial cable
manufacturer
Hoisting and/or support
Cable clips
Various sizes
Securing coax cable
Ethernet Cable
Cat 5e or better, outdoor rated,
maximum 300ft (100 m)
PoE from injector to gateway
DC power cable
1 Pair 16AWG Tinned Copper, PVC-
NYL Insulation E2
Belden P/N: 9487 recommended

Neptune Technology R900 Specifications

General

Brand	Neptune Technology
Model	R900
Category	Gateway
Language	English