Neptune E-CODER - 1: General Instructions

1
1 General Instructions
The E-CODER
®
is an electronic absolute encoder register
designed for use with Neptune’s Automatic Reading and Billing
(ARB
®
) System. This register operates with Neptune’s R900
®
and R450
™
MIUs, providing advanced features such as leak,
backflow, and tamper detection.
With the E-CODER register, both the homeowner and the utility
can use the following features.
• Nine-digit display for visual reading
• Eight digits for billing
• Water flow indicators
• Intermittent leak detection icon on LCD panel
• Continuous leak detection icon on LCD panel
This guide can help you identify and read information displayed
on the E-CODER register. It can also help you recognize the
common causes of leaks and what to do if a leak is found. After
the leak is repaired, this guide also contains steps to determine
that the leak is no longer evident.
2 Product Description
The face of the E-CODER allows you to read various types of
information available. The face of the E-CODER is shown in
Figure 1.
Figure 1 E-CODER Coder Face
Solar panel
Nine-digit
meter reading
LCD
display