Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
105
|
Controller Operation
GrowSphere
Operating System
Configuring Dosing Recipes
This screen opens when creating a new dosing recipe or editing existing one. Perform the following steps to configure dosing recipes:
z
Method: Options include:
z
1/1000: The fertilizer is injected in
proportion to the water flowing in the main
line. The proportion is defined using a ratio
of 1 litter of fertilizer for 1000 litters of
water (useful when irrigation room is very
close to field).
z
Spread: Determines amount of fertilizer to
be injected during the predefined time of
the irrigation.
z
Bulk: Amount of fertilizer that will be
injected constituently during an irrigation
shift. The amount can be set by time or
quantity. Selected when irrigation room is
far away from the field and the fertilizers
are mixed with large amount of water in the
distribution pipes.
1. Name the dosing recipe
The system provides a
default name, but you can
edit it and provide a more
meaningful name.
4. Define the following parameters:
For each dosing channel, the folowing
parameters can be defined.
3. Target EC, target pH
Displays the defined target
EC/pH values.
2. Activate the relevant
dosing channels
Tap the Programs linked
button to navigate to the
Irrigation Dashboard.
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English