Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
116
|
Controller Operation
GrowSphere
Operating System
Uncompleted Irrigation Log (continued)
Each of the following parameters includes two
values: amount left and amount planned.
z
Duration: Irrigation shift time.
z
Qty/m3: Water quantity delivered by the valve.
z
mm: Water quantity set for the irrigation
program or shift. This quantity is the same for
all valves in the shift.
z
m3/h: Average flow rate during irrigation shift
as measured by the main line water meter. If
the main line doesn't have a water meter, this
value will be the sum of the flow rate of all
valves in the shift.
Dosing Channels:
The amount of fertilizer injected during the shift
relevant for each dosing channel:
z
Planned: The planned amount calculated
according to the recipe.
z
Actual: The actual metered amount.
4. Review uncompleted irrigation log
details (cont.):
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English