Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
117
|
Controller Operation
GrowSphere
Operating System
6.4.4 Dosing Log
Perform the following steps to view a log of dosing events:
2. Select Irrigation Logs
from the list of logs (see
Accessing Logs)
3. Select a date range
See Selecting Date Range
4. Review dosing log details:
z
Irrigation status icon: Indicates a valve's
irrigation status. Options include:
z
Set irrigation amount was attained.
z
Set irrigation amount was not attained.
z
Valve: Irrigation valve number.
z
Completed: The irrigation was completed
(Yes) or not (No).
z
Recipe: The dosing recipe linked to the shift.
z
Date: The date when the irrigation shift
occurred.
z
Start: Start time of the irrigation shift.
z
Duration: Total irrigation shift time.
z
Qty/m3: Water quantity delivered by the valve.
z
mm: Water quantity set for the irrigation
program or shift. This quantity is the same for
all valves in the shift.
z
m3/h: Average flow rate during irrigation shift
as measured by the main line water meter. If
the main line doesn't have a water meter, this
value will be the sum of the flow rate of all
valves in the shift.
1. Tap the Reports button
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English