Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
119
|
Controller Operation
GrowSphere
Operating System
6.4.6 Pump Accumulation Events Log
Perform the following steps to view the amount of water that was pumped:
z
Pump: Name of the pump.
z
Start Date: The date when the irrigation shift
occurred.
z
Duration: Total amount of time the pump was
in operation.
z
Qty/m3: Amount of water that the pump
delivered. This quantity can be measured by
the pump station/main line water meters or
calculated according to the shift nominal flow.
2. Select Pumps
Accumulation Events
from the list of logs (see
Accessing Logs)
3. Select a date range
See Selecting Date Range
4. Review pump accumulation log details:
1. Tap the Reports button
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English