Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
131
|
Controller Operation
GrowSphere
Operating System
6.7.3 Monitoring Irrigation Shifts
The Shifts tab displays all shifts and valves of the current running irrigation program. This
tab is useful to monitor the status of the running shift, the state of each of the shift valves.
Perform the following steps to view the shifts:
2. Tap the Shifts tab
1. Tap the SCADA button
3. Tap the arrows to view all
shifts
NOTES
z
An irrigation program can
have a maximum of 32
shifts, and each shift can
contain 32 valves.
z
All valves assigned to a shift
run simultaneously.
Irrigation shift completed
Uncompleted shift
See Uncompleted Irrigation Log
for the reason why this shift did
not complete.
Current running shift
A status bar indicates how
much time is left until the shift
is complete.
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English