Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere
™
MAX User Manual
60
|
Controller Configuration
GrowSphere
Operating System
5.3.3 Delays
System Delays
Perform the following steps to define system delay times:
z
On Delay: Amount of time between start
of irrigation and when the device starts
operating.
z
Off Delay: Amount of time between end
of irrigation and when the device stops
operating.
z
Unit: Unit of measure for the delay time.
The example below illustrates pump and valve
on and off delay:
4. Select the System Delays tab 5. Define the system delays times:
3. Verify the correct main
line is selected
1. Tap the Configuration
button
2. Select Preferences and
type your credentials
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English