netAlly LINKRUNNER G2 - Page 82

Filename: Capture files are automatically named
using the date and time. Touch this field to enter a
custom name.
File Size: Touch this field to specify a size for the
capture file. The default is 1 MB. The capture stops
when the captured file reaches this size. When
capture is running, the File Size field displays the
current file size as data is captured.
Frame Slice Size: Touch this field to select a
specific frame slice size for your capture. The
default is Unlimited.
Frames: When capture is running, the Frames
field displays the number of captured frames.
SD Space: When capture is running, this field
appears and shows the remaining space on the
SD card.
Saving and Accessing Capture Files
To start Capturing, tap the FAB on this
screen. Tap it again to stop capturing
packets.
82
LinkRunner G2 Tools