NetApp DS4246 User Manual

4. If the problem persists, and if the disk shelf has multiple temperature sensors but only
one exhibits the problem, replace the module that contains the sensor reporting the error.
5. If the problem persists, contact technical support.
Note: You can display temperature thresholds for each disk shelf by using the
environment shelf command. For clustered systems, you must run this command
from the nodeshell of the target node.
DS4243, DS2246, DS4486, and DS4246 Installation and Service Guide 46
Monitoring disk shelf components

NetApp DS4246 Specifications

General

Data transfer rate	6 Gbit/s
Storage drive size	3.5 \
Storage drive interface	Serial Attached SCSI (SAS)
Storage drives installed	Yes
Installed storage drive type	HDD
Supported storage drive types	HDD & SSD
Total installed storage capacity	40.8 TB
Maximum supported storage capacity	- TB
Number of storage drives installed	24
Chassis type	Rack (4U)
Product color	Black
Device class	Large Enterprise Business
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Number of power supply units	2
Operating altitude	0 - 3045 m
Non-operating altitude	-305 - 12192 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	610 mm
Width	483 mm
Height	178 mm