EasyManuals Logo

NetApp DS4246 User Manual

NetApp DS4246
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Rules for handling disk carriers for DS4486 disk shelves
DS4486 disk shelves are shipped with the majority of the disk carriers—each containing two
drives—removed to reduce the chassis weight for installation. Because you must unpack and
install the disk carriers into the disk shelf, you must understand and follow the disk carrier
handling rules to avoid damaging the disk drives.
To avoid damaging the disk drives in the disk carrier, always follow these rules:
Attention: The two disk drives housed in each disk
carrier are fragile! Improper handling of disk drives is
the leading cause of disk drive damage.
Prevent electrostatic discharge (ESD):
Keep the disk carrier in the ESD bag until you are ready to install it.
Do not insert a metal tool or knife into the ESD bag.
Open the ESD bag by hand or cut the top off with a pair of scissors.
Retain the ESD bag and any packing material for the disk carrier in case you must return it
later.
Note: NetApp requires that all returned disk carriers be in an ESD-rated bag.
Always wear an ESD wrist strap grounded to an unpainted surface on your storage
enclosure chassis.
If a wrist strap is unavailable, touch an unpainted surface on your storage enclosure chassis
before handling the disk carrier.
Handle disk carriers gently:
Never touch the connector pins on a disk carrier.
Do not force the disk carrier into the enclosure.
The disk carrier slides easily into the enclosure, and gentle, firm pressure completely
engages the carrier latch.
Do not stack disk carriers on top of each other.
Do not bang disk carriers against surfaces.
DS4243, DS2246, DS4486, and DS4246 Installation and Service Guide 69
Rules for handling disk carriers for DS4486 disk shelves

Table of Contents

Other manuals for NetApp DS4246

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NetApp DS4246 and is the answer not in the manual?

NetApp DS4246 Specifications

General IconGeneral
Data transfer rate6 Gbit/s
Storage drive size3.5 \
Storage drive interfaceSerial Attached SCSI (SAS)
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity40.8 TB
Maximum supported storage capacity- TB
Number of storage drives installed24
Chassis typeRack (4U)
Product colorBlack
Device classLarge Enterprise Business
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Number of power supply units2
Operating altitude0 - 3045 m
Non-operating altitude-305 - 12192 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth610 mm
Width483 mm
Height178 mm

Related product manuals