NetApp DS460C User Manual

Steps
1. Put on antistatic protection.
2. Unpack the new fan module, and place it on a level surface near the shelf.
Save all packing material for use when returning the failed fan.
3. From the back of the disk shelf, look at the Attention LEDs to locate the fan module you need to remove.
You must replace the fan module that has its Attention LED on.
Item LED name State Description
Attention Solid amber The fan has a fault
4. Press the orange tab to release the fan module handle.
32

NetApp DS460C Specifications

General

Model	DS460C
Category	Storage
Form Factor	4U
Drive Support	60 drives
Drive Types	SAS
Connectivity	12Gb/s SAS
Host Connectivity	SAS
RAID Support	RAID 6 (with NetApp storage controllers)