11. Return the failed part to NetApp, as described in the RMA instructions shipped with the kit.
Contact technical support at
NetApp Support, 888-463-8277 (North America), 00-800-44-638277 (Europe),
or +800-800-80-800 (Asia/Pacific) if you need the RMA number or additional help with the replacement
procedure.
Monitor disk shelf LEDs - shelves with IOM12 modules
You can monitor the health of your disk shelf by understanding the location and status
conditions of the LEDs on your disk shelf components.
Operator display panel LEDs
The LEDs on the disk shelf front operator display panel indicate whether your disk shelf is
functioning normally or there are problems with the hardware.
The following table describes the three LEDs on the operator display panel used in DS460C, DS224C, and
DS212C disk shelves:
LED icon LED name State Description
Power Solid green One or more power
supplies are supplying
power to the disk shelf.
Attention Solid amber An error occurred with the
function of one of more
FRUs: the disk shelf, disk
drives, IOM12 modules,
or power supplies.
Check event messages to
determine corrective
action to take.
Blinking amber The shelf ID is in a
pending state.
Power cycle the disk shelf
for the shelf ID to take
affect.
47
To Next Page
Loading...
Need help?
General
