NetComm Wireless 4G M2M Router
Upload
To access the Upload page, click on the System menu, then System Configuration and then Upload.
The Upload page allows you to upload firmware files, HTTPS certificates or user created application packages to the NTC-140-
02router. When firmware files have been uploaded, they can also be installed from this page. PDF files, such as this user guide may
also be uploaded for access on the router’s help page.
For more information on application development, contact NetComm Wireless about our Software Development Kit.
Figure 116 - Upload page
Updating the Firmware
The firmware update process involves first updating the recovery image firmware and then updating the main firmware image.
Note: In order to perform an update, you must be logged into the router with the root manager account (see the Advanced
configuration section for more details).
To update the NTC-140-02 router’s firmware:
1.
Power on the router as described in the Installing the router section.
2.
Log in to the router with the root user account (See the Advanced configuration section for details)
3.
Select the System item from the top menu bar, select the System configuration item from the menu on the left and then
select the Upload menu item.
4.
Under the File uploads section, click the Choose a file button. Locate the firmware image file on your computer and click
Open. The image is named ntc_140_x.x.xx.x.cdi.
5.
Click the Upload button. The firmware image is uploaded to the storage on the router.
Figure 117 - File upload
To Next Page
Loading...
Need help?
General
