NetComm Wireless 4G M2M Router
3.
Click the Upload button to begin uploading it to the router. The file appears in the list of files stored on the router.
Figure 147 - Server certificate file uploaded
4.
Repeat steps 2 and 3 for the server key file.
5.
Click the Install link next to the server.crt file then click OK on the prompt that is displayed. The certificate file is installed.
Repeat this for the key file. When each file is installed it is removed from the list of stored files.
Figure 148 - Installing the server.crt file
To Next Page
Loading...
