NetComm NTC-140-02 User Manual

20
NetComm Wireless 4G M2M Router
www.netcommwireless.com
UM-00012 v1.0
Power input mode
Displays the power source being used.
Tracking Area Code (TAC)
Identifies a tracking area within a particular network.
IMSI
The International mobile subscriber identity is a unique identifier of the user of a cellular network.
Cell ID
A unique code that identifies the base station from within the location area of the current mobile network signal.
Channel number (UARFCN)
The channel number of the current cellular connection.
CID
Cellular configuration ID
Module PRIID Revision
Module version used for customization.
Module PRIID PRI part number
The part number of the Module PRIID.
PRI carrier
The carrier network.
PRI config
Configuration file for the current carrier network.
Reference Signal Received
Quality (RSRQ)
RSRQ calculates signal quality taking into consideration the RSSI. It is calculated by N x RSRP / RSSI where N is the number of
Physical Resources Blocks (PRBs) over which the RSSI is measured.
Reference Signal Received Power
(RSRP)
A cell-specific reference signal used to determine RSRP.
Packet service status
Displays whether the packet service is attached or detached. When APN or username/password is changed, the device
detaches and reattaches to the network.
Table 10 - Status page item details

NetComm NTC-140-02 Specifications

General

Brand	NetComm
Model	NTC-140-02
Category	Wireless Router
Language	English