NetComm Wireless 4G M2M Router
Sets the corresponding profile to be the default gateway for all outbound traffic except traffic for which there are
configured static route rules or profile routing settings.
Toggles the corresponding profile on and off. Only one profile may be turned on at any time.
The APN configured for the corresponding profile.
The username used to log on to the corresponding APN.
When set to ON, the router will allow local devices to access the Wireless WAN network when it is roaming onto a
foreign network. When set to OFF, the router will deny network access to data services when roaming onto a foreign
network. This setting is OFF by default. Note that additional costs may apply when using roaming data services.
Table 11 - Data connection item details
Connecting to the mobile broadband network
The router supports the configuration of up to six APN profiles; these profiles allow you to configure the settings that the router will
use to connect to the broadband network and switch easily between different connection settings.
Manually configuring a connection profile
To manually configure a connection profile:
1.
Click the Edit button corresponding to the Profile that you wish to modify. The data connection profile settings page is
displayed.
Figure 15 - Data connection profile settings
To Next Page
Loading...
Need help?
General
