NetComm Wireless 4G M2M Router
A list of the detected cellular service carriers in your area is displayed.
Figure 29 - Detected operator list
Note: Certain module firmware versions may not allow forbidden operators to be selected.
Select the most appropriate service from the list shown and click Apply.
When Select operator mode is set to Automatic, the router selects the most appropriate operator based on the inserted SIM card.
This is the default option and is sufficient for most users.
SIM security settings
The SIM security settings page can be used for authenticating SIM cards that have been configured with a security PIN.
Unlocking a PIN locked SIM
If the SIM card is locked, you will receive a notice when you access the Status page after which you will be directed to the PIN
settings page to enter the PIN. The PIN settings page lists the status of the SIM at the top of the page.
To Next Page
Loading...
