EasyManua.ls Logo

NetComm ROUTER WITH VOICE 3G10WV

NetComm ROUTER WITH VOICE 3G10WV
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3G10WV HSPA Wi-Fi Router with Voice – 83
Description: Enable or disable wireless LAN interface.
Valid value: 0 or 1
0 – disabled the wireless LAN interface.
1 – enabled the wireless LAN interface.
Default value: 1
--hide <0|1>
Description: Hide wireless LAN network name (SSID).
Valid value: 0 or 1
0 – not hide wireless LAN SSID.
1 – hide wireless LAN SSID
Default value: 0
--ssid <ssidStr>
Description: Set Wireless LAN network name (SSID).
Valid value: 32 characters string
--country <countryStr>
Description: Set Wireless LAN Country, only accept abbreviation.
Valid value: 2 or 3 characters string (AUSTRALIA is abbreviated to AU).
--isolate <0|1>
Description: Set wireless devices isolation. When enabled, wireless devices connected to the router will not be
able to communicate to each other
Valid value: 0 or 1
0 – not isolate wireless devices.
1 – isolate wireless devices
Default value: 0
--channel <channelVal>
Description: Set the wireless LAN channel.
Valid value: 0~14
0 means auto select channel.
Default value: 0
--rate <rateVal>
Description: Set the wireless LAN data rate.
Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)
0 means auto

Related product manuals