NetComm ROUTER WITH VOICE 3G10WV

84 – 3G10WV HSPA Wi-Fi Router with Voice
Default value: 0
--mrate <rateVal>
Description: Set the wireless LAN Multicast rate.
Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps)
0 means auto
Default value: 0
--rts <rtsThreshold>
Description: Set the wireless LAN RTS threshold.
Valid value: 0~2347
Default value: 234
--frag <fragThreshold>
Description: Set the wireless LAN fragment threshold.
Valid value: 256~2346
Default value: 2346
--dtim <dtimInterval>
Description: Set the wireless LAN DTIM interval.
Valid value: 1~255
Default value: 1
--beacon <beaconInterval>
Description: Set the wireless LAN beacon interval.
Valid value: 1~65535
Default value: 100
--xpress <on|off>
Description: Enable or disable the xpress feature
Valid value: on / off
Default value: off
--gmode <auto|performance|lrs|802.11b>
Description: Set the wireless LAN G mode
Default value: auto
--gprotect <off|auto>
Description: Enable or disable the gprotect feature
Default value: auto
--preamble <long|short>
Description: Set the wireless LAN preamble