Table 2. Factory default settings (Continued)
Default SettingFeature
EnabledPort LEDs
EnabledPower LED
Other features
No LAGs configuredLink aggregation
DisabledPower saving mode
Enabled (nonconfigurable)Loop detection
Enabled (nonconfigurable)Jumbo frames
Technical Specifications
The following table shows the technical specifications of the switch.
Table 3.Technical specifications
DescriptionFeature
IEEE 802.3 Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3u 100BASE-TX
IEEE 802.1p Class of Service
IEEE 802.3ab 1000BASE-T
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE standards
RJ-45, supporting 10BASE-T, 100BASE-TX, or 1000BASE-TNetwork connectors
8Ethernet ports
12V, 1.0A (The plug is localized to the country of sale.)
Power consumption from 0.8W to 3.8W
Power adapter
From 0.8W to 3.8WPower consumption
7.7 x 5.9 x 1.6 in. (195 x 149 x 40 mm)Dimensions (W x D x H)
1.63 lb (0.74 kg)Weight
32º to 104ºF (0° to 40°C)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
Factory Default Settings and Technical Specifications
77
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
To Next Page
Loading...
General