We recommend these port connections for the one-touch performance presets (see Apply a Performance
Preset Mode on page 20). However, you can save custom performance presets and use different port
connections (see Manage Custom Performance Preset Modes on page 26).
• DC power connector. One 12V, 1.0 A DC connector for the power adapter.
The RESET button is located on the bottom panel of the switch. Press the RESET
button for five seconds to reset the switch to factory default settings. For more
information, see Return the Switch to Its Factory Default Settings on page 62.
Note
Switch Label
The switch label on the bottom panel of the switch shows the serial number, MAC address, and default login
information of the switch.
Figure 4. Switch label
Hardware Overview of the Switch
8
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
To Next Page
Loading...