EasyManuals Logo

Netgate SG-2100 User Manual

Netgate SG-2100
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Security Gateway Manual SG-2100
macOS
The device associated with the system console is likely to show up as, or start with, /dev/cu.usbserial-<id>.
Run ls -l /dev/cu.
*
from a Terminal prompt to see a list of available USB serial devices and locate the ap-
propriate one for the hardware. If there are multiple devices, the correct device is likely the one with the most recent
timestamp or highest ID.
Linux
The device associated with the system console is likely to show up as /dev/ttyUSB0. Look for messages about the
device attaching in the system log files or by running dmesg.
Note: If the device does not appear in /dev/, see the note above in the driver section about manually loading the
Linux driver and then try again.
FreeBSD
The device associated with the system console is likely to show up as /dev/cuaU0. Look for messages about the
device attaching in the system log files or by running dmesg.
Note: If the serial device is not present, ensure the device has power and then check again.
© Copyright 2022 Rubicon Communications LLC 29

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Netgate SG-2100 and is the answer not in the manual?

Netgate SG-2100 Specifications

General IconGeneral
Storage8 GB eMMC
Ethernet Ports5 x 1 GbE
USB Ports1 x USB 3.0
Operating SystempfSense Plus
CPUQuad Core ARM Cortex-A53 1.2 GHz
RAM2 GB
Power Supply12V DC
Console Port1 x RJ-45 (Serial)

Related product manuals