Netgate SG-2100 User Manual

Security Gateway Manual SG-2100
22. Click Delete beside Member(s) 4. This will remove LAN4 from this VLAN group.
23. Click Save.
24. Go to the Ports tab.
25. Click on Port VID 1 beside LAN4. Backspace through 1 and insert 4084, the new VLAN ID.
26. Click Save.
This completes the configuration of a discrete port on the Netgate SG-2100.
By default all traffic is blocked. Create the appropriate firewall rules to allow the traffic. Go to Firewall > Rules and
then the OPT1 tab (in this example) to configure the firewall rules.
Enable DHCP if necessary by going to Services > DHCP Server, OPT1 tab (for this example).
© Copyright 2022 Rubicon Communications LLC 49

Netgate SG-2100 Specifications

General

Storage	8 GB eMMC
Ethernet Ports	5 x 1 GbE
USB Ports	1 x USB 3.0
Operating System	pfSense Plus
CPU	Quad Core ARM Cortex-A53 1.2 GHz
RAM	2 GB
Power Supply	12V DC
Console Port	1 x RJ-45 (Serial)